Commercial Bathroom Partition Dimensions & Standard Toilet Stall Sizes
Whether you’re planning a school restroom, office renovation, gym locker room, or public facility, understanding standard toilet partition dimensions helps ensure your project meets building code requirements and maximizes available space.
This guide covers standard stall sizes, ADA toilet compartment dimensions, urinal divider dimensions, and also common mounting clearances used in commercial restroom construction.
Commercial bathroom partition dimensions vary depending on the mounting style, accessibility requirements, and also material selected. Most commercial restroom stalls use a standard 36″ wide compartment with depths ranging from 59″ to 60″, while ADA toilet compartments require larger clearances to meet accessibility standards.
Bathroom Partition Stall Dimensions
| Stall Type | Width | Depth | Door Opening |
|---|---|---|---|
| Standard Stall | 36" | 59"-60" | 24"-30" |
| ADA Stall | 60" Min. | 56"-59" Min. | 32" Clear Opening |
| Ambulatory Stall | 35"-37" | 60" Min. | 32" Clear Opening |
Typical Toilet Partition Heights
| Mounting Style | Panel Height | Floor Clearance | Support Method |
|---|---|---|---|
| Overhead Braced | 58" | 12" | Headrail & Floor Anchored |
| Ceiling Hung | 58" | 12" | Ceiling Supported |
| Floor Mounted | 58" | 12" | Floor Anchored Only |
| Floor-to-Ceiling | 84" - Full Height | 0" | Floor & Ceiling Anchored |
Ceiling Height Requirements for Bathroom Partitions
Certain toilet partition mounting styles require a floor-to-finished-ceiling measurement before fabrication and installation.
Ceiling Hung Partitions: Require adequate structural support above the finished ceiling and an accurate floor-to-ceiling measurement to ensure proper suspension and also alignment.
Floor-to-Ceiling Partitions: Are anchored directly to both the floor and ceiling, making an accurate floor-to-ceiling measurement critical for fabrication as well as installation.
Measure from the top of the finished floor surface to the bottom of the finished ceiling. Measurements should be taken after all flooring and ceiling finishes have been installed whenever possible.
How to Get a Bathroom Partition Quote
Because restroom layouts and requirements vary, the most accurate pricing comes from a custom quote based on your project details.
- Email sales@doorsunlimitedshop.com to speak to a partition expert
- Upload your restroom layout here and our experts will review and quote it within 24 hours.
- Call us at 978-537-2337 to speak to a partition expert
- Build a custom quote using our Online Quote Form.
To compare materials in more detail, including durability, fire ratings, and mounting options, see our Bathroom Partition Materials Comparison.
What are the standard toilet partition dimensions?
Most commercial toilet partition stalls are 36 inches wide and 59 to 60 inches deep. Standard partition panels are typically 58 inches high with 12 inches of floor clearance.
What is the standard bathroom stall width?
The most common commercial bathroom stall width is 36 inches. Wider stalls may be required for ADA accessibility or specific project requirements.
What are ADA toilet partition dimensions?
ADA toilet compartments require a minimum width of 60 inches and a minimum depth of 56 inches for wall-hung toilets or 59 inches for floor-mounted toilets. ADA stalls must also provide a minimum 32-inch clear door opening.
How tall are commercial toilet partitions?
Most commercial toilet partitions use 58-inch-high panels with approximately 12 inches of floor clearance. Floor-to-ceiling systems may extend from the finished floor to the finished ceiling for maximum privacy.
What is the typical toilet partition door opening?
Most commercial toilet partition doors provide a clear opening between 24 and 30 inches. ADA-compliant stalls require a minimum 32-inch clear opening.